Abrasion Tester AT 100 XL (Bond Index)

功能和特性

资料下载

查询报价<

联系我们报价详情 目录下载 生成产品信息的PDF文档

The Bond Abrasion Index， devised by F.C. Bond in the 1940‘s， quantifies the abrasivity of ores and minerals. The index serves to calculate metal wear rates in crushers and ball consumption rates in ball mills.

The AT 100 XL consists of a rotating insert into which dry ore samples with a defined particle size are placed. An impact paddle mounted on a centre shaft， rotating at a higher speed than the insert， grinds the sample over a defined period of time.

Both insert and paddle rotate in the same direction. The paddle is made from standard alloy steel hardened to 500 Brinell. The Abrasion Index is calculated from the weight loss of the paddle under standard operating conditions.

优点

pre-set rotation speed and time

CE conform version

性能指标

应用矿石和矿物的耐磨性量化

应用领域地质 / 冶金， 建筑原料， 环境 / 资源回收利用

评估利用拍子称重计算质量损失

进料粒度*< 19 mm

批次加料量*400 g 每次

程序数量4，每 400 g

耐磨性测试时间4*15 min

旋转叶片NO DATA FOUND (copySource=3" x 1" x ?" hardened to 500 Brinell)

转速拍击 632 min-1 / 插入 70 min-1

电源数据：230 V， 50 Hz

电源接头：单相

机体尺寸 (宽x高x纵深)700 x 1140 x 700 mm

净重~ 246 kg

标准CE

Please note:

受样品材料性质和仪器配置/设定的影响

作用原理

The Bond Index Abrasion Tester AT 100 XL consists of a rotating insert into which a dry sample with a defined particle size is placed. An impact paddle mounted on a centre shaft rotating at a higher speed than the insert grinds the sample over a defined period of time.

Both insert and paddle rotate in the same direction. The paddle is made from standard alloy steel hardened to 500 Brinell. The Abrasion Index is calculated from the weight loss of the paddle under standard operating conditions.

根据技术改造和误差调整