手机版 |
产品分类 |
碳纳米管粉体
双壁碳纳米管KY TND DWCNTs, 纯度+60%
高纯单壁碳纳米管(SWCNT)纯度+90%
单壁碳钠米管 粉体
工业用多壁碳纳米管KY TNM1
伪阵列型多壁碳纳米管KY SN-02A
高分子型多壁碳纳米管(原粉)
高分子型多壁碳纳米管(坯料)KY SN-01C
碳纳米管分散液
石墨烯、碳纳米管各类分散剂
【水性碳纳米管分散液】无异味高稳定低阻导电剂电热CNTs碳浆涂料
【碳纳米管分散液】水性碳纳米管浆料8%无异味CNTs稳定低阻导电剂
石墨烯粉体
化学还原氧化石墨烯粉体
小尺寸高导电石墨烯粉体KYSHE-1
(小尺寸高阻隔)石墨烯粉体
(小尺寸)氧化石墨烯粉体KYSGO-1
(高导电型)石墨烯粉体
高阻隔型石墨烯粉体
氧化石墨烯粉体
石墨烯透明导电薄膜(CVD)
导电石墨烯粉体
硅氧烷氧化石墨烯 GO-563
石墨烯分散液
透明抗静电分散液
石墨烯分散液(小尺寸高导电水性)
石墨烯分散液(小尺寸高阻隔水性)
氧化石墨烯分散液(小尺寸水性)
石墨烯分散液(高导电水性)
氧化石墨烯分散液(水性1%)KYHLGOW-1
氧化石墨烯浆料GO1221-1% 高分散性
石墨烯分子筛净化材料
小片径氧化石墨烯分散液
科研军工级石墨烯
其他碳材料
水性碳浆墙地暖丝凹印涂布碳纤维碳纳米管石墨烯高低温导电浆
电子电池橡胶用超导电炭黑
低温电热膜用碳纤维无溶剂型导电碳浆
碳材料延伸应用
石墨烯导电银浆
高温石墨烯油性散热涂料KY CHR-3
石墨烯高温烧结表封剂KY HWTJBF-1
石墨烯高温烧结油墨KY HWTJ-300
【导电碳浆】丝印涂布电热膜用高稳定中温碳纤维碳纳米管石墨烯浆
石墨烯导热母粒
【PTC电热地毯电热膜】碳纤维石墨烯碳浆印制远红外碳浆PET发热片
【石墨烯防锈涂料】本征石墨烯纯烯锌全面激活锌3和1防锈附作力强
电池级导电浆料
水性碳纳米管导电分散液产品KYDW-LB-06 12%-2
碳纳米管导电浆料DW-LB-01 NMP 6.25%-1
石墨烯碳管复合导电浆料产品DW-LB-02 NMP 5%-1
高固含碳纳米管导电浆料DW-LB-04 NMP 9%-1
石墨烯
透明抗静电分散液
化学还原氧化石墨烯粉体
小尺寸高导电石墨烯粉体KYSHE-1
(小尺寸高阻隔)石墨烯粉体
(小尺寸)氧化石墨烯粉体KYSGO-1
(高导电型)石墨烯粉体
高阻隔型石墨烯粉体
氧化石墨烯粉体
石墨烯分散液(小尺寸高导电水性)
石墨烯分散液(小尺寸高阻隔水性)
碳纳米管
工业用多壁碳纳米管KY TNM8
双壁碳纳米管KY TND DWCNTs, 纯度+60%
高纯单壁碳纳米管(SWCNT)纯度+90%
低纯单壁碳纳米管(SWCNT) ,纯度+60%
单壁碳钠米管 粉体
伪阵列型多壁碳纳米管KY SN-02A
高分子型多壁碳纳米管(原粉)
高分子型多壁碳纳米管(坯料)KY SN-01C
水性碳纳米管导电分散液产品KYDW-LB-06 12%-2
碳纳米管导电浆料DW-LB-01 NMP 6.25%-1
碳纤维
低温电热膜用碳纤维无溶剂型导电碳浆
高纯碳纤维粉(石墨纤维粉)
石墨化碳纤维碳纳米纤维CNTs
炭粉
特种导电炭黑锂离子电池用
橡胶添加用高导电性易分散导电炭黑
纳米材料
大片径氧化石墨烯干粉HLGO-1
少壁碳纳米管垂直阵列
分散剂
石墨烯、碳纳米管各类分散剂
石墨
电子电池橡胶用超导电炭黑
微信公众号 |
联系方式 |
友情链接 |
技术文章
Computational Optimizing the Electromagnetic Wave Reflectivity of Double-Layered Polymer Nanocomposites
四川垦业科技发展有限公司2022-09-27点击708次
请联系产品经理(V 13689651620 索取原文)
Double-layered absorption-dominated electromagnetic interference (EMI) shielding composites are highly desirable to prevent secondary electromagnetic wave pollution. However, it is a tremendous challenge to optimize the shielding performance via the trial-and-error method due to the low efficiency. Herein, a novel approach of computation-aided experimental design is proposed to efficiently optimize the reflectivity of the double-layered composites. A normalized input impedance (NII) method is presented to calculate the electromagnetic wave reflectivity of multilayered EMI shielding composites. The calculated results are a good match with the experimental results. Then, the NII method is utilized to design polyvinylidene difluoride/MXene/carbon nanotube (PVDF/MXene/CNT) composites. According to the optimization of the NII method, the prepared PVDF/MXene/CNT composite has an ultralow reflectivity of 0.000057, which outperforms that reported in current work and satisfies the requirement of electromagnetic wave absorbing material. Additionally, its average EMI shielding effectiveness is 30 dB, demonstrating that PVDF/MXene/ CNT composite simultaneously achieves shielding and absorption. The ultralow reflection mechanism can be ascribed to the ideal impedance match. Both the PVDF/MXene and the PVDF/CNT layers can attenuate electromagnetic energy, which subverts the traditional cognition of double-layered absorption-dominated EMI shielding composites. The NII method opens a way for the practical fabrication of double-layered absorption-dominated EMI shielding composites.